Download Foam Core Catalog

• With special yellow ring (German Technology)

• 100% leak proof 

• No threading, no solvent cement 

• High pressure bearing capacity 

• Dimensional accuracy & UV protected 

• High flow rates, no chocking

 AVAILABLE SIZE: 75mm, 90mm, 110 mm, 160mm (Type A & B)

Astral Drainmaster

DRAINMASTER PIPES:

ASTRAL DRAINMASTER pipes are manufactured as per IS: 13592 with unique push-fit system in two different class named as “TYPE A” & “TYPE B”. TYPE A pipes are recommended for use in ventilation and rain water application while TYPE B pipes are recommended for soil and waste discharge applications. Pipes are available in all sizes in different lengths with 100% leak proof yellow ring (German Technology).

 

 DRAINMASTER FITTINGS:

ASTRAL DRAINMASTER fittings - both grooved ring and pasting types are manufactured as per IS: 14735. They are available in full range starting from 75 mm to 160 mm and are fully compatible with ASTRAL DRAINMASTER pipes.

 

 YELLOW RING:

In this unique system, pipe and fittings are joined together by simple pushing the spigot into socket end. The spigot end is held firmly and tightly in the socket by reinforced pre-fitted yellow rubber ring provided in the groove. Thus it ensures leak-proof joints which can withstand high pressure and it also prevents choking.

Pipes

Fittings

Adhesives

THERMAL EXPANSION AND CONTRACTION:

ASTRAL DRAINMASTER piping system will undergo thermal expansion and contraction like any other thermoplastic material. The thermal expansion & contraction depends on the co-efficient of thermal expansion (5.4 × 10¯5 mm / mm /ºC for PVC), length of piping and temperature difference encountered by the piping. Normally for drainage & sewerage system temperature difference of atmosphere will effect more to thermal movement of piping rather than effluent temperatures as full bore discharges normally do not happen for prolonged time and also these discharges are periodic in nature. Still expansion & contraction issue needs to be addressed. For solvent weld systems, change in direction, offset or expansion loops are recommended while for ring-fit joining systems, specially designed rubber rings and proper joining of pipes and fittings will take care of length change.

 

 HANDLING:

 Take all reasonable care when handling ASTRAL DRAINMASTER uPVC pipes particularly in very cold conditions when the impact strength of the material is reduced.

• Do not throw or drop pipes, or drag them along hard surfaces.

• In case of mechanical handling, use protective slings and padded supports. Metal chains and hooks should not make direct contact with the pipe.

 

ON-SITE STORAGE:

 Stack pipe lengths: Either on a flat base or on level ground or on 75mm × 75mm timber at 1 meter maximum centres. Provide side support with 75mm wide battens at 1mtr centers ideally, stacks should contain one diameter pipe size only. Where this is not possible, stack largest diameter pipes at base of stack. Small pipes may be nested inside larger pipes. Store all materials in well ventilated, shady conditions. If stored in the open for long periods or exposed to strong sunlight, cover the stack with opaque sheets. Store fittings under cover. Do not remove from cartons or packaging until required. Store solvent cement and cleaning fluid in a cool place out of direct sunlight and away from any heat source.

• With special yellow ring (German Technology)

• 100% leak proof

• No threading, no solvent cement required

• High pressure bearing capacity

• Dimensional accuracy & UV protected

• High flow rates, no choking